Recent Posts

Pages: [1] 2 3 4 5 6 ... 10
1
Resonance Group / Re: Water Cell Senior Design
« Last post by philm on April 05, 2014, 11:56:33 PM »
Good news everyone,

Metal came in on Friday. We have two tubes, 0.50 in OD and 0.75 in OD measuring 2 ft.

Also, the solidworks model was finished last night and I rendered two pictures. I have them attached below if you would like to take a look at them. IN the near future, I plan on doing a high res render (4K specifically).
2
Resonance Group / Re: Water Cell Senior Design
« Last post by philm on March 28, 2014, 11:18:05 AM »
Instead of having to make a billion replies with updates to the specifications, I will be posting a link to the google drive with the specification:

https://drive.google.com/folderview?id=0B4HIHLim_W-Ga0F0aXJrT3RhamM&usp=sharing
3
Resonance Group / Re: Water Cell Senior Design
« Last post by philm on March 03, 2014, 07:28:48 PM »
OK everyone,

Here is the first revision of our specs for the WFC. This is only Rev 1.0 and as we progress through the project, I anticipate that we will indeed make changes to our specs
4
Resonance Group / Re: Water Cell Senior Design
« Last post by philm on February 15, 2014, 07:01:11 PM »
http://peswiki.com/index.php/OS:Water_Fuel_Cell

An article about Stan's technnology. This is a good read
5
Resonance Group / Re: Water Cell Senior Design
« Last post by philm on January 29, 2014, 10:37:17 AM »
6
Resonance Group / Re: Water Cell Senior Design
« Last post by philm on January 29, 2014, 10:31:53 AM »
And he is a news clip featuring the inventor:

Stan Meyers water powered Buggy


And a link to a columbus dispatch article:

http://www.dispatch.com/content/stories/local/2007/07/08/hydroman.ART_ART_07-08-07_A1_4V77MOK.html
7
Resonance Group / Re: Water Cell Senior Design
« Last post by philm on January 20, 2014, 08:56:37 PM »
Here is another great video to watch. A documentary

Ūn


So for those wondering, here is the full documentary:

It Runs On Water - Full Documentary
8
Resonance Group / Re: Water Cell Senior Design
« Last post by philm on January 11, 2014, 10:39:33 PM »
Here we go. Pictures of the small scale prototype that I built today. I did test it with standard electrolysis and it works perfect. I did make a small hole at the top to release the gas.
9
Resonance Group / Re: Water Cell Senior Design
« Last post by philm on December 21, 2013, 11:19:52 PM »
Here is another resource. This is for programmers but is a guide on C# programming. Specifically C# 4.0
10
Resonance Group / Re: Water Cell Senior Design
« Last post by UncleThadius on December 16, 2013, 08:25:47 PM »
I'll help you out on this if you like. Been working off and on since 1998 on this tech.

Tad
Pages: [1] 2 3 4 5 6 ... 10