Author Topic: Water Cell Senior Design  (Read 5872 times)

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Water Cell Senior Design
« on: November 20, 2013, 11:12:59 PM »
Good evening everyone,

This topic will serve as the hub for the water cell senior design project. We plan on researching the water cell built by Stanley Meyer.

From my reading, the Stanley Meyer water cell is based on a process known as hydrogen fracturing in which high voltage was being pulsed into a metal container storing the water. When pulsed, the hydrogen atoms and the oxygen atoms would break apart.

I will be posting any relevant information concerning this project within this topic. Please stay tuned, more developments on the way.

(Also, if there are any forum members who have any relevant information, please feel free to post)

In the attachment, is volume 7 of the RG reference manual. It has alot of what we will be doing but for now, take a look at Water as Fuel. It is on page 150 (book numbering) or page 154 (pdf page numbering).

Here also is a video that I found concerning Stanley Meyer. Supposedly, it is about how his process works. I haven't gotten a chance to take a look at it fully. I recommend looking at the video once you become familiar with the process and what Hydrogen Fracturing is.

Stanley Meyer and his brother on how the water fuel injection system works. (NEW RELEASED)


Stanley Meyer 1992 Interview


http://www.energeticforum.com/water-fuel/3217-stanley-meyer-explained-7.html#post47874

http://www.energeticforum.com/water-fuel/3217-stanley-meyer-explained.html

Replication videos (I am not sure if the devices are true replications but this will give you an idea of what the system will do):

Free Energy Generator | Dave's - Stanley Meyer Replication Part 1 of 3


RAVI 'S STANLEY MEYER REPLICATION WATER FUEL CELL -007


https://www.youtube.com/watch?v=FVxKqZjef3w

« Last Edit: March 13, 2014, 10:47:28 AM by philm »

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #1 on: November 27, 2013, 11:38:14 PM »
So after doing some initial research, there are a few questions that I would like to have answers to.

First off, the frequency of the pulses, is it suppose to be at the resonance frequency of water or is it suppose to be at the resonance frequency of the CL circuit?

From the description, it looks like the water container forms a capacitor in which the water is the dielectric. I wonder what would happen if we do pulse it at the circuits resonant frequency.

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #2 on: December 13, 2013, 09:27:35 AM »
Here is another document about the meyer cell. Although, I would suggest that you have a basic understanding of how it works before delving into this document

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #3 on: December 13, 2013, 12:52:11 PM »
Videos on how to build the tubes:

Stanley Meyers easy to build Tubes


Stanley Meyers easy to build Tubes PT 2

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #4 on: December 16, 2013, 03:21:52 PM »
So Stanley's brother started a company in Canada called Xogen. Here is one of the company's sponsor videos for those interested:

Xogen

Offline UncleThadius

  • Global Moderator
  • Advanced Poster
  • *****
  • Posts: 41
    • View Profile
Re: Water Cell Senior Design
« Reply #5 on: December 16, 2013, 08:25:47 PM »
I'll help you out on this if you like. Been working off and on since 1998 on this tech.

Tad

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #6 on: December 21, 2013, 11:19:52 PM »
Here is another resource. This is for programmers but is a guide on C# programming. Specifically C# 4.0

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #7 on: January 11, 2014, 10:39:33 PM »
Here we go. Pictures of the small scale prototype that I built today. I did test it with standard electrolysis and it works perfect. I did make a small hole at the top to release the gas.

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #8 on: January 20, 2014, 08:56:37 PM »
Here is another great video to watch. A documentary

Ūn


So for those wondering, here is the full documentary:

It Runs On Water - Full Documentary
« Last Edit: January 29, 2014, 10:25:41 AM by philm »

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #9 on: January 29, 2014, 10:31:53 AM »
And he is a news clip featuring the inventor:

Stan Meyers water powered Buggy


And a link to a columbus dispatch article:

http://www.dispatch.com/content/stories/local/2007/07/08/hydroman.ART_ART_07-08-07_A1_4V77MOK.html

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #10 on: January 29, 2014, 10:37:17 AM »

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #11 on: February 15, 2014, 07:01:11 PM »
http://peswiki.com/index.php/OS:Water_Fuel_Cell

An article about Stan's technnology. This is a good read

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #12 on: March 03, 2014, 07:28:48 PM »
OK everyone,

Here is the first revision of our specs for the WFC. This is only Rev 1.0 and as we progress through the project, I anticipate that we will indeed make changes to our specs

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #13 on: March 28, 2014, 11:18:05 AM »
Instead of having to make a billion replies with updates to the specifications, I will be posting a link to the google drive with the specification:

https://drive.google.com/folderview?id=0B4HIHLim_W-Ga0F0aXJrT3RhamM&usp=sharing

Offline philm

  • PDS Engineering Lead
  • Global Moderator
  • Mega Poster
  • *****
  • Posts: 149
    • View Profile
Re: Water Cell Senior Design
« Reply #14 on: April 05, 2014, 11:56:33 PM »
Good news everyone,

Metal came in on Friday. We have two tubes, 0.50 in OD and 0.75 in OD measuring 2 ft.

Also, the solidworks model was finished last night and I rendered two pictures. I have them attached below if you would like to take a look at them. IN the near future, I plan on doing a high res render (4K specifically).